loading
Contact information

Ultraplus Adhesive (Ground)

Wärmedämmputz Innen

FIXPER ULTRAPLUS ADHESIVE It is an adhesive mortar with high adhesion strength, elastic character, reduced slip feature, resistant to heat change, water and frost, developed, cement-based, large-sized coating material such as ceramic granite ceramic, granite, marble, natural stone, porcelain.

USAGE AREAS

FIXPER ULTRAPLUS ADHESIVE; It is used for bonding solid, dust-free and low water absorption coating materials such as cement based plaster, screed, ceramic on lined concrete surfaces with low water absorption rate on horizontal and vertical surfaces indoors and outdoors. It is used for bonding granite, marble, cotto, natural stone-like coatings with low water absorption rate to interior and exterior horizontal and vertical surfaces, especially in places exposed to heavy traffic.

APPLICATION PROCEDURE

The surface should be dry, clean, solid and free from dust, oil, dirt or materials that prevent adhesion should be removed from the surface, materials such as mortar and cement residues should be scraped off.

APPLICATION INSTRUCTIONS

Mixing Ratio It should be mixed with water in the ratio of 24 - 26% of its weight. (6.0 - 6.5 liters of water for 25 kg packaging) Low-speed electric mixer (400 rpm) Special tip mixing equipment It should be mixed with a low-speed mixer so that no dust and lumps remain. Mortar 5-10 min. After resting, 1 - 2 minutes before application. must be mixed again.

PACKAGINGDETAILS

It is presented in craft bags of 25 kg net.

STORAGE CONDITIONS

It should be stored in its unopened original package, in a dry (maximum 60% relative humidity) and cool (temperature between +5 C ° and +25 C °) and its shelf life is 12 months.

SAFETY RECOMMENDATIONS

For easy and safe application of the product, please refer to the Safety Data Sheet (SDS).

Technicial Specifications

  • Packing
    25 Kg / Bag ( ± 2 %)
  • Appearance
    White Powder
  • Application Temperature
    -5°C+40°C
  • Application Thickness
    1 mm – 5 mm
  • Application Time
    45 Minute
  • Method of Application
    SteelTrowel
  • First Drying
    3 Hours
  • Setting Time
    8 Hours
  • Fire Response Class
    A1
  • Theoretical Consumption
    1 kg/m²/ 1 mm
  • Compressive Strength
    CSII (5,2N/mm²)
  • Water vapor permeability
    None
  • Capillary Water Absorption
    None
  • Adhesion Strength
    7,2 Kgf/cm

Specifications

Innovative building materials for inside and outside

All advantages at a glance

Product features that can be seen!

HEAT INSULATION

WATER INSULATION

FIRE PROTECTION

SOUND INSULATION

BREATHABLE

NATURAL, HEALTHY,ECO-FRIENDLY

ANTIBACTERIAL

RESISTANT AGAINST EARTHQUAKES

STABLE INSULATIONVAL VALUE

ECONOMIC

EASY AND RAPIDAP APPLICATION

TEXTURE COMPATIBILITYAND
AND LONG LIFE

INNO Baustoffe

Our products at a glance

Our target is always to deliver quality products based on innovative insulation techniques to our customers.